Chain Filter

Type AKF - WDAK
The Aagaard chain filter is designed to meet the needs of large high volume extraction plants. It is also capable of handling high volumes of waste material, that might for example be found in the joinery industry using high throughput moulders and saw etc. Provided with gravity separation top inlet chambers and large hopper section beneath the filters ensure good collection of coarse and abrasive material with minimum wear and blinding of the filters above. Periodic or continuous cyclic cleaning is provided by reverse flow regeneration fans to maintain the highest efficiency under all working conditions.
This type of filter can be supplied to handle up to 300.000 m³/hr – approximately 150.000CFM.

 

Chain Filter

Type AKF - DLK - DHLK - DXLK
The chain filter is ideally suited for medium-sized quantities of chips and air up to 150,000 m3/hr and for expanding businesses where extensions often take place. The filter is automatically cleaned by means of regeneration fans which rinse the filter bags.

Chain Filter Triplex

Type AKF - WDHK
The Aagaard chain filter is designed to meet the needs of large high volume extraction plants. It is also capable of handling volumes of waste material, that might for exampel be found in the joinery industry using high throughput moulders and saws etc.
Provided with gravity separation top inlet chambers and large hopper section beneath the filters ensure good collection of coarse and abrasive material with minimum wear and blinding of the filters abover. Periodic or continuous cyclic cleaning is provided by reverse flow regeneration fans to maintain the highest efficiency under all working conditions.
This type of filter can be supplied to handle up to 300,000 m3/h - approximately 150,000 C.F.M.

Chain Filter

Type AKF - AMX
The Aagaard AMX chain filter is designed to handle more difficult materials such as very fine and pulverised dust which may be produced from de-nibbing, sanders and brush machines.
Unlike the model WDH the dust is collected on the outside of the filter tube which enhances distribution on the media and assists release when the reverse flow cleaning operates. The filter is very reliable and can handle air volumes up to 300,000 m3/h - approximately 176,000 C.F.M.

Aagaard A/S, Smedev├Žnget 14, 9560 Hadsund, Denmark, Phone: +45 96 53 12 00,

E-mail: mail@aagaard-systems.dk, Telefax: +45 98 57 42 15